InteliMains 210 Global Guide
431
LBI: N
Related FW 2.0.0 Related applications MCB, MGCB, BTB
Comm object 184
Description
Binary input has no function. Use this configuration when binary input is not used.
Not Used
6 back to Logical binary inputs alphabetically
LBI: R
Related FW 2.0.0 Related applications MCB, MGCB, BTB
Comm object 620
Description
The controller is switched to the AUTO mode (there are four modes OFF / MAN / AUTO / TEST) when this
binary input is closed. When opens controller is switched back to previous mode.
This binary input has the lowest priority from Remote OFF / MAN / AUTO / TEST binary inputs
Remote control priority:
Remote OFF (Highest priority)
Remote TEST
Remote MAN
Remote AUTO (Lowest Priority)
Remote AUTO
6 back to Logical binary inputs alphabetically
Related FW 2.0.0 Related applications MCB, MGCB, BTB
Comm object 4
Description
If the input is active, the controller will not accept any actions regarding the system control – e.g. writing of
commands and setpoint changes via remote communication interfaces.
Remote CtrlLock
6 back to Logical binary inputs alphabetically
To Next Page
Loading...
Need help?
General
