InteliMains 210 Global Guide
439
Related FW 2.0.0 Related applications MCB, MGCB, BTB
Comm object 2
Description
The output is designed to be used as external alarm indication such as a red bulb in the control room etc. The
output is active when at least one unconfirmed alarm is present in the alarmlist and remains active until
confirmation of alarm.
Alarm
6 back to Logical binary outputs alphabetically
Related FW 2.0.0 Related applications MCB, MGCB, BTB
Comm object 1400
Description
This is an output from the General Analog Input 1 switch function. The behavior of the switch depends on the
adjustment of the setpoints Analog Switch 1 On (page 208) and Analog Switch 1 Off (page 208). The value is
measured from AIN SWITCH 01 (PAGE 484) analog input.
Image 8.108 General analog input 1 switch
AIN Switch01
6 back to Logical binary outputs alphabetically
To Next Page
Loading...
