Maintenance
100
C3M2-OM-EN-02
Note
The wheel nut torque settings in the table below are for clean dry threads. If
the threads are lubricated the settings must be reduced.
6.6 Wheel Nut Torque
All wheel nuts must be torqued every 250 hours. Park the truck in accordance with the
recommended parking procedure. Torque the wheel nuts according to the settings in
the wheel nut torque table below using a suitable torque wrench.
Wheel Nut Torque Table
Position Torque Settin
Front Wheel 210Nm / 155ft.lbs
Rear Wheel 210Nm / 155ft.lbs
To Next Page
Loading...
