Basic Information
26
C3M2-OM-EN-02
Warning
DO NOT tilt the forks forward past horizontal with a load on the forks.
Use tilt with caution when the mast is in a raised position.
DO NOT use forward and backward tilt in quick succession.
2.9 Tilting
The degree of forward and backward tilt that may be used is governed by the
application.
Tilting Guidelines
When travelling with the truck loaded tilt the mast back and keep the load low.
This will help stabilize loads with an uneven weight distribution.
When loading at high elevations, only tilt the load back far enough to seat it
against the front vertical face of the forks.
When unloading at high elevations, make sure to only use enough tilt to level
the load for placing onto the rack or stack.
Forward tilt past horizontal is only provided to assist the operator in withdrawing
the forks from a load after the load has been placed.
To Next Page
Loading...
