Basic Information
17
C3M2-OM-EN-02
Warning
Unintended use can endanger the lives of operating personnel or other
persons in the vicinity of the truck.
Unintended use can cause extensive damage to the truck and/or to property
or materials being handled.
Section 2: Basic Information
2.1 Intended Use
Operation by inexperienced persons, or in an unintended manner, can result in
hazards that can lead to personal risk and subsequent harm to the operator and
persons in the operating area of the truck. Improper use can damage the truck as
well as the product being handled and property in the vicinity of operation.
Read and understand the operating instructions in this manual before operating the
truck. Before performing production work, the operator should find a remote, open
site to become familiar with the controls and trucks response. The truck must be in
serviceable condition before attempting to use it as described in the operating
instructions. If it is determined that the truck is not in a fit condition for operating,
notify the site or machine supervisor to have it repaired before use.
The Combilift forklift has been designed to lift a load, transport it and place it in
another location, taking into account the safety instructions listed in this manual and
any other local laws and regulations where applicable. One work cycle consists of
lifting, transporting and placing a load. Similar uses of the truck with alternative
attachments which do not change the safety requirements for the truck but modify
the way in which it is used are only acceptable when attachments that have been
approved by Combilift are used. The intended operation is described in this Manual.
The instructions describe how to operate, inspect and maintain the truck.
The truck must not be used for any of the following activities:
lifting people without an approved work platform securely fitted
transporting people
pushing or pulling loads
The truck must not be used if:
it has received unauthorised repairs
it has received unauthorised modifications
2.2 General
This truck is designed for use in ambient temperatures ranging from -25°C (-13°F) to
+40°C (+104°F) if the correct hydraulic oils and greases are used. For operation
outside these temperatures, please consult the manufacturer as special modifications
and lubricants are required.
To Next Page
Loading...
