CombiLift C6000 - 6.4 Diesel Engine Maintenance Schedule

Maintenance
98
C3M2-OM-EN-02
Note
The recommended maintenance intervals in the engine maintenance
schedule are for maintaining engines operating in normal conditions.
More frequent maintenance will be required if the engine is being operated
in an arduous manner or in a harsh or aggressive environment. The
frequency is governed by application and must be determined by the user.
6.4 Diesel Engine Maintenance Schedule
Maintenance Task Interval - Every
✔
Page
Drain Fuel Filter Water Separator
250 Hours
106
Check Fuel Hoses & Connections for Leaks
Squeeze Air Filter Dust Valve
116
Clean Air Filter Primary Element
116
Check V-belt Tension, Adjust If Necessary
115
Check Air Intake Hose(s) & Clamps
116
Check Radiator Hoses & Clamps
*
Change Oil
103
Change Oil Filter Element
103
Change Second Fuel Filter Element
500 Hrs
106
Change V-Belt
2 Years
*
Remove Sediment from Fuel Tank
Change Water Separator Fuel Filter Element
1 Year 106
Check Valve Clearance
1000 Hours
*
Check Injector Tip
1500 Hours
*
Check EGR Cooler
*
Check Head Cover Valve
*
Check Turbo-Charger
3000 Hours
*
Check EGR System
*
Remove Ash From Particulate Filter (DPF)
As Required / 6000 Hrs
*
Change Air Filter Primary Element
1 Year
116
Clean Radiator
Check Exhaust Manifold for Cracks, Leaks, Damage
*
Check DPF Related Piping
*
Check EGR Piping
*
Change Air Intake Hose(s) & Clamps
2 Years
116
Change Rubber Water Hoses & Clamps
*
Change Oil Separator Rubber Pipes
*
Change Lubricant Rubber Piping
*
Change Coolant
111
Change DPF Related Rubber Piping
*
Change EGR Cooler Rubber Piping
*
Change Fuel Pipes & Clamps
*
Change DPF Related Rubber Piping
*
Change Air Filter Safety Element
3 Years
116
* Refer to the relevant engine manual. Contact your local Combilift partner if required.