Components & Controls
31
C3M2-OM-EN-02
Warning
Not wearing the seatbelt or operating with a damaged seatbelt can result in
injury to the operator.
DO NOT operate the truck unless the seatbelt is fastened across the top of
the lap.
Note
If the truck has the seat belt switch option fitted the drive is disabled if the
seatbelt tongue is not properly fastened in the seatbelt buckle.
Note
The drive and the hydraulic mast and fork functions are all disabled if the
operator is not sitting in the seat.
Note
If the truck has the seat belt switch option fitted the drive is disabled if the
seatbelt tongue is not properly fastened in the seatbelt buckle.
Seat Sensor Pad
The seat has a sensor pad in the pan that senses when the operator is sitting in the
seat. The park brake is automatically applied - after a short time delay - when the
operator vacates the seat.
Seatbelt Switch (If Fitted)
The seatbelt may have a switch fitted that senses when the seatbelt is fastened.
To Next Page
Loading...
