Components & Controls
35
C3M2-OM-EN-02
B. Weight Adjustment
To adjust the seat for the operator’s weight pull or press the weight adjustment
lever (B) when sitting on the seat.
The seat is adjusted correctly for weight when the arrow is in the middle of the
viewing window.
Within the viewing area, the individual height can be adjusted to a minimum
spring movement.
When the minimum/maximum weight adjustment has been reached, you can
hear it reaching the upper or lower end stop.
C. Backrest Angle Adjustment
To adjust the angle of the backrest pull up the locking lever (C) to release the
backrest catch. Do not press back against the backrest when releasing the
backrest catch.
Lean forward or back at the waist to adjust the angle of the backrest. Release
the locking lever when the backrest is at the desired angle.
It should not be possible to move the backrest after it has been locked. Lean
back and forward on the seat to ensure it is locked in position.
D. Lumbar Support Adjustment
The lumbar support increases the seat comfort.
To adjust the curvature in the upper part of the backrest cushion turn the
adjustment knob (D) clockwise.
To adjust the curvature in the lower part of the backrest cushion turn the
adjustment knob (D) anticlockwise.
To Next Page
Loading...
