C4-C5XL MK3 O&S
1-10
C4000MK3-OM-EN-11
Trailers and Rail Cars
1. Before you load or unload a trailer, or rail car, make sure it does not
move unintentionally:
Set the brakes
Chock the wheels
2. In addition to setting the brakes and chocking the wheels, if a semi-
trailer is not coupled to a tractor, make sure that all four corners are
supported to prevent upending or corner dipping.
3. Maintain a safe distance from the edge of ramps, platforms, or other
similar working surfaces.
4. Never attempt to move a trailer with the Combilift truck.
To Next Page
Loading...
