C4-C5XL MK3 O&S
2-10
C4000MK3-OM-EN-11
Auxiliary Function Lever (4
th
or 5
th
Lever From Operator
Depending on Mast Side Shift Option)
This lever controls the flow of oil to an attachment when
fitted.
On trucks fitted with attachments providing more than
one function, the truck may be fitted with a button on the
fourth function lever. Operators must acquaint
themselves with the operation of these special
provisions before using the truck.
Combilift have a number of standard functions that can
be fitted to the truck and operated via the auxiliary
function lever. These include:
Fork Positioner / Side shift / Telescopic Forks / Lift Drop Forks
Take time to familiarise yourself with the auxiliary
functions on the Combilift and how they are operated by
the auxiliary lever
Warning
Adding an attachment to a Combilift will alter the rated capacity of the
machine. A load chart must be obtained from Combilift Ltd for any
attachment that is fitted to indicate this chan
e in capacit
Warning
ONLY attachments that have been approved by Combilift engineers may be
fitted to Combilift Trucks
To Next Page
Loading...
