2
• This Comelit product has been designed and manufactured for use in the creation of audio and video communication systems in residential, commercial, industrial and
public buildings.
• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the indications provided in
the Manuals / Instruction sheets supplied with those products.
• Disconnect the power supply before carrying out any operations on the wiring.
• Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
• We advise against running the system wires through the same duct as power cables (230V or higher).
To ensure Comelit products are used safely:
• carefully observe the indications provided in the Manuals / Instruction sheets,
• make sure the system created using Comelit products has not been tampered with / damaged.
• Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in the Manuals /
Instruction sheets.
• Any repairs must be carried out:
• for the products themselves, exclusively by Comelit Group S.p.A.,
• for the systems, by qualified technical personnel.
• Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in this manual.
• Comelit Group S.p.A. reserves the right to change the information provided in this manual at any time and without prior notice.
Warning
To Next Page
Loading...
