Comelit Maxi Manager - Climate Control Features; Climate Device Monitoring; Humidity Control Settings; Temperature Control Settings

22
CLIMATE
CONTENTS CONTENTS
CLIMATE
From the climate section you can monitor, set and program the
displayed devices.
 Press the icon to access the menu.
Clima
Thermostat 1
Thermostat 2
Thermostat 3
Thermostat 4
18°
21°
A
F
OFF
20°
25°
20°
18°
21° M
A
48% 55%
4. 5.3.2.1.
4. List of devices configured for climate control
5. Temperature / humidity reading
6. System status indication
LEGEND
Heating
Cooling
Humidification
Dehumidification
Running Standby Off
7.
Selected setpoint
8. Mode active on the device
 Select a device
Temperature control:
Thermostat 2
Thermostat 3Thermostat 1
17,5°
5° 30°
A M
20°
1.
2. 3. 4. 7. 8.6.5.
1. Selected device
 Use the arrows to scroll through the available devices.
2. Temperature reading
3. Select the desired mode (Automatic/Manual)
» The green colour indicates the set mode.
4. Indication showing device operating due to setpoint being reached
5. Temperature setpoint
6. Current page indication
» Available if the device has thermostat/humidistat functions
enabled
 Swipe to move from one menu to another.
7. Select the desired season (Winter/Summer)
(WINTER): Heating
(SUMMER): Cooling
» The green colour indicates the set season.
8. Settings
Humidity control:
36%
0% 100%
A M
50%
Thermostat 2
Thermostat 3Thermostat 1
1.
2. 3. 4. 7. 8.6.5.
1. Selected device
 Use the arrows to scroll through the available devices.
2. Humidity reading
3. Select the desired mode (Automatic/Manual)
» The green colour shows the active mode.
4. Indication showing device operating due to setpoint being
reached
5. Humidity setpoint
6. Current page indication
» Available if the device has thermostat/humidistat functions
enabled
 Swipe to move from one menu to another.
7. Select the desired operation (Humidification/Dehumidification)
Humidification
Dehumidification
» The green colour indicates active operation.
8. Settings