Comelit Maxi Manager - Alarm Zone and User Management; Zone Status and Event Logs; User Management and PIN Change

ALARM
10
CONTENTS
Zone status
Alarm_Alarm menu_Zone status
The function is used to check the status of the various zones / areas in
the system configuration.
Tutte Aperte Sabotate/Guasto Isolate Escluse
Zona giorno: porta terrazza
All Open Sabotaged/Faulty Isolated Excluded
Day zone: patio door
 Press the relevant tab to view any indications of zones that are
open, sabotaged or in fault mode, isolated or excluded.
Users
Alarm_Alarm menu_Users
The directory lists the users created in the alarm control panel.
 Select the corresponding box to enable the user to use a PIN
when arming / disarming the alarm.
 Deselect the corresponding box to remove the option of using a
PIN when activating / deactivating the alarm from the user.
Impresa pulizie
Family
Cleaning company
Gardeners
Change PIN
Select the name to access the change PIN code menu.
Impresa pulizie
Family
Cleaning company
Gardeners
1 2 3
4 5 6
7
C
8 9
0
Ripetere nuovo PIN
Inserire nuovo PIN
 Enter the new PIN twice, then confirm or press C to exit.
» The system is updated.
Event log
Alarm-Alarm menu-Event log
Events memory
The Events memory page can be used to view the actions saved by
the alarm control panel.
25/01/2020 13:20:21
Utente loggato
Aree: Giardino, Garage 1, Cantina
ID: 3
1. 2.
User logged in
Areas: Garden, Garage 1, Cellar
1. Use the arrows to scroll through the events in the memory
2. Press the icon to view the entire list
Alarms memory
The Alarms memory page provides information regarding the selected
alarm event.
25/01/2020 17:49:41
Allarme zone furto
Area: Cantina
Zona: Porta ingresso
ID: 3
2.1.
Burglar zone alarm
Area: Cellar
Zone: Entrance door
1. Use the arrows to scroll through the events in the memory
2. Press the icon to view the entire list