Comen N Series - default chapter; Table of Contents

Service Manual for N-series/NM-series/NMPro-series Patient Monitors
2
Contents
Chapter 1 Safety 1-1
1.1 Safety Information 1-1
1.2 Contraindication 1-3
1.3 Symbols 1-3
Chapter 2 Warranty and Service 2-1
2.1 Warranty Terms 2-1
2.2 What is Excluded 2-1
2.3 Service Procedure 2-2
2.3.1 Fill in the RMA Form 2-2
2.3.2 Warranty Duration 2-3
2.3.3 Send Comen the RMA Form and Select a Solution 2-3
2.3.4 Send the Parts to Comen 2-4
Chapter 3 Principle Introduction 3-1
3.1 Overview 3-1
3.1.1 Monitor Introduction 3-1
3.1.2 System Composition 3-1
3.1.3 System Block Diagram 3-1
3.2 Module Introduction 3-2
3.2.1 Power Switch Board 3-2
3.2.2 Infrared Transmitting Board 3-2
3.2.3 3.2.3 K1 Main Board (Main Control) 3-3
3.2.4 Parameter Board 3-4
Chapter 4 Troubleshooting Guide 4-1
4.1 Introduction 4-1
4.2 Part Replacement 4-1
4.3 Patient Monitor Status Check 4-1
4.4 Software Version Check 4-1
4.5 Technical Alarm Check 4-1
4.6 Troubleshooting Guide 4-2
4.6.1 Power On/Off Failures 4-2
4.6.2 Display Failures 4-2
4.6.3 ECG Failures 4-3
4.6.4 RESP Failures 4-4
4.6.5 SpO
2
Failures 4-5
4.6.6 NIBP Failures 6
4.6.7 TEMP Failures 4-7