54
SterilCard reader installation
The SterilCard kit includes:
• Administrator and User SterilCard
• SterilCard reader
• SterilCard reader support
• Cable
• 4 self-tapping screws
• 4 spacers
• 4 M3x6 screws
• 4 nuts
• 8 washers
Follow these instructions to assemble the SterilCard kit:
1. Assemble the SterilCard reader on its support as shown in the picture:
• M3x6 screw
• Washer
• SterilCard reader
• Spacer
• SterilCard reader support
• Washer
• Nut
In order to obtain this assembly:
SterilCard reader
To Next Page
Loading...
