Saves the binary file named “SPRITE DATA” starting at location
3584 through 4095 (BANK 0).
BSAVE “PROGRAM.SCR”,D0,U9,BO,P3182 to P8000
Saves the binary file named “PROGRAM.SCR” in the memory
address range 3182 through 7999 (BANK 0) on drive 0, unit 9.
CATALOG
Displays the disk directory.
CATALOG [Ddrive number] [<ON | ,>Udevice number]
[.wildcard string]
The CATALOG command displays the directory on the specified
drive just like the DIRECTORY command. See the DIRECTORY
command for more examples (DIRECTORY and CATALOG are
interchangeable).
EXAMPLE:
CATALOG Displays the disk directory on drive 0 of unit 8
CHAR
Displays characters at the specified position on the
screen
CHAR [color source ],x,y[,string] [,RVS]
This is primarily designed to display characters on a bit mapped
screen, but it can also be used on a text screen. Here’s what the
parameters mean:
color source 0=Background
1=Foreground
2=Multicolor 1
3=Multicolor 2
x Character column (0-79) (wraps around
to the next line in 40-column mode)
y
string
reverse
Character row (0-24)
String to print
Reverse field flag (0=off, 1 =on)
17-10
To Next Page
Loading...
