CommScope ATC200-LITE-USB User Manual

Section 12–Adjusting Downtilt-Group of Antennas Multiple Actuators ATC200-LITE-USB Teletilt
®
RET System
12-4 October 2014 Bulletin 639536 • Revision L
10. You will be notified when all antennas
have successfully reached the new tilt
angle. Click OK (Figure 12-4).
11. The Set Electrical Tilt for Sector
screen will display the new electrical tilt
setting in the Current Tilt field. At this
point, either additional tilt angles may be
applied or you may return to the main
screen. To return to the main screen,
click Close (Figure 12-5).
12. After all electrical tilt adjustments are
made, a report can be saved to a file for
future reference (see Section 18).
Figure 12-4. Movement Complete.
Figure 12-5. Closing Sector Move Screen.
Click OK.
Current Tilt.
Click Close.

CommScope ATC200-LITE-USB Specifications

General

Brand	CommScope
Model	ATC200-LITE-USB
Category	Remote Control
Language	English