. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-3
Compaq ProLiant 800 Server Reference Guide
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
POST Error Messages continued
Error Code Audible
Beeps
L=Long
S=Short
Probable Source of
Problem
Action
163-Time & Date Not
Set
2S Invalid time or date in
configuration memory.
Run the System
Configuration Utility
and correct.
164-Memory Size
Error
2S Configuration memory
incorrect
Run the System
Configuration Utility
and correct.
170-Expansion
Device Not
Responding
None EISA or PCI expansion
board failure
Check board for secure
installation. Replace
the failed board if
necessary.
172- Configuration
Nonvolatile Memory
Invalid
None Nonvolatile configuration
corrupt or jumper
installed.
Run the System
Configuration Utility
and correct.
172-1 Configuration
Nonvolatile Memory
Invalid
None Nonvolatile configuration
corrupt.
Run the System
Configuration Utility
and correct.
173-Slot ID Mismatch None Board replaced,
configuration not updated.
Run the System
Configuration Utility
and correct.
174-Configuration
/Slot Mismatch
Device Not Found
None EISA or PCI board not
found.
Run the System
Configuration Utility
and correct.
175-Configuration
/Slot Mismatch
Device Found
None EISA or PCI board added,
configuration not updated.
Run the System
Configuration Utility
and correct.
176-Slot with Not
Readable ID Yields
Valid ID
None EISA or PCI board in slot
that should contain an ISA
board.
Run the System
Configuration Utility
and correct.
continued
To Next Page
Loading...
