Compaq ProLiant 800 - Page 135

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-5
Compaq ProLiant 800 Server Reference Guide
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
POST Error Messages continued
Error Code Audible
Beeps
L=Long
S=Short
Probable Source of
Problem
Action
208-Invalid Memory
Speed - Check DIMM
[SIMM] Installation
1L,1S The speed of the memory
is too slow, where:
xx00 = expansion board
SIMMs are too slow, or
00yy = system board
SIMMs are too slow.
xx and yy have
corresponding bit set.
The speed of the
memory modules must
be 60 ns. Verify the
speed of the memory
modules installed.
211-Cache Switch
Set Incorrectly
None Switch not set properly
during installation or
upgrade
Verify switch settings.
212-System
Processor
Failed/Mapped out
1S Processor in slot x failed. Run Diagnostics and
replace failed
processor.
213-Cache Size Error None Invalid optional cache size Replace cache with
256K cache.
213-System
Processor Not
Installed
1S System processor
configured for slot
indicated is missing.
Install processor in the
slot indicated or run
the System
Configuration Utility to
remove the processor
from the .CFG file.
214-DC-DC Converter
Failed
None PowerSafe Module (DC-
DC Converter) Failed
Run Diagnostics.
Contact your service
provider.
301-Keyboard Error None Keyboard failure Turn off the computer,
then reconnect the
keyboard.
continued