Compaq ProLiant 800 - Page 140

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-10 Diagnostics Tools
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
POST Error Messages continued
Error Code Audible
Beeps
L=Long
S=Short
Probable Source of
Problem
Action
1731-Fixed Disk 1
does not support
DMA Mode
None Fixed disk drive error Run the System
Configuration Utility
and correct.
1740-Fixed Disk 0
failed Set Block Mode
command
None Fixed disk drive error Run the System
Configuration Utility
and correct.
1741-Fixed Disk 1
failed Set Block Mode
command
None Fixed disk drive error Run the System
Configuration Utility
and correct.
1750-Fixed Disk 0
failed Identify
command
None Fixed disk drive error Run the System
Configuration Utility
and correct.
1751-Fixed Disk 1
failed Identify
command
None Fixed disk drive error Run the System
Configuration Utility
and correct.
1760-Fixed Disk 0
does not support
Block Mode
None Fixed disk drive error Run the System
Configuration Utility
and correct.
1761-Fixed Disk 1
does not support
Block Mode
None Fixed disk drive error. Run the System
Configuration Utility
and correct.
continued