. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-13
Compaq ProLiant 800 Server Reference Guide
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
POST Error Messages continued
Error Code Audible
Beeps
L=Long
S=Short
Probable Source of
Problem
Action
1771-Primary Disk
Port Address
Assignment Conflict
None Internal and external hard
drive controllers are both
assigned to the primary
address.
Run the System
Configuration Utility
and correct.
1772-Secondary Disk
Port Address
Assignment Conflict
None Address Assignment
Conflict. Internal and
external hard drive
controllers are both
assigned to the
secondary address.
Run the System
Configuration Utility
and correct.
1773-Primary Fixed
Disk Port Assignment
Conflict
None Fixed disk drive error. Run the System
Configuration Utility
and correct.
1774- Slot x Drive
Array - Obsolete data
found in Array
Accelerator.
Select F1 to discard
contents of Array
Accelerator.
Select F2 to write
contents of Array
Accelerator to drives.
None SMART-2 Controller error Data found in Array
Accelerator is older
than data found on
drives. Press F1 to
discard the older data
in the Array
Accelerator and retain
the newer data on the
drives.
1776-Drive Array -
SCSI Port Termination
Error
None External and internal SCSI
drives are both configured
to Port 1.
Reconfigure drives.
continued
To Next Page
Loading...
