. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-8 Installing a New Battery
Writer: Project: Installing a New Battery Comments:
File Name: K-appa.doc Last Saved On: 4/24/97 10:45 AM
!
WARNING: To reduce the risk of electric shock or damage to the
equipment:
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
Disconnect power from the server or other product by
unplugging the power cord from either the electrical outlet or
the server or other product.
7. Turn on the server.
8. Run the Compaq System Configuration Utility to reconfigure the
system. Refer to Chapter 4, "Using the System Configuration Utility."
To Next Page
Loading...
