. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-11
Compaq ProLiant 800 Server Reference Guide
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM
6. Install the thermal pad, heat sink, and the heat sink retaining clip.
Figure 3-7. Installing the processor thermal pad and heat sink
7. Install the heat sink retaining clip by attaching the end opposite from
the extended tab, then pressing down on the extended tab until the clip
snaps into place.
Figure 3-8. Installing the heat sink retaining clip
To Next Page
Loading...
