Condair EL2 - 22 8.3 Notes on Fault Elimination; Resetting the Error Indication (Red LED Lights)

64
8.3 Notes on fault elimination
DANGER! Danger of electric hazard!
Fortheeliminationoffaultssetthesteamhumidieroutofoperation as described in chapter
6.5, separate the unit from the mains and secure it against inadvertent power-up.
Theeliminationoffaultsmustbecarriedoutbyqualiedandwelltrainedprofessionalsonly.
Malfunctionsrelatingtotheelectricalinstallation(e.g.replacementoffuses)mustberepairedby
authorized personnel or by your Condair representative’s service technician only.
RepairworkandthereplacementoffaultycomponentsmustbecarriedoutbyyourCondairrepre-
sentative’s service technician only!
8.4 Resetting the error indication (red LED lights)
Toresettheerrorindication:
Disconnectthesteamairhumidierfromthemains.Waitapprox.5seconds,thenreconnect
the unit to the mains.
Note:Ifthefaulthasnotbeeneliminated,theerrorindicationreappearsafterashortwhile.