Condair EL2 - Mounting and Installation Work; Important Notes for Mounting and Installation Work

22
5 Mounting and installation work
Qualicationofpersonnel
All mounting and installation work must be carried out only by wellqualiedpersonnelauthorised
by the owner.Itistheowner’sresponsibilitytoverifyproperqualicationofthepersonnel.
General note
Strictlyobserveandcomplywithallinformationgiveninthepresentinstallationandoperatinginstruc-
tionsregardingthelocationoftheunitandtheinstallationofwater,steamandelectricity.
Observe and comply with all local regulations dealing with water, steam and electrical installa-
tions.
Safety
Someinstallationworkrequiresremovaloftheunitcover.Pleasenotethefollowing:
DANGER! Danger of electric hazard!
Youmaygetintouchwithlivepartswhentheunitisopen.Thesteamhumidiermustbeconnected
tothemainsonlyafterallmountingandinstallationworkhasbeencompletedandthecoverhas
been relocated properly.
CAUTION!
The electronic components inside the humidier are very sensitive to electrostatic discharge.
Whentheunitisopenforinstallationwork,appropriatemeasuresmustbetakentoprotectthese
componentsagainstdamagecausedbyelectrostaticdischarge(ESDprotection).
5.1 Important notes for mounting and installation work