10
Before using the appliance
for the first time
Preliminary cleaning Take the accessories out of the oven.
Remove all packaging remnants, e.g. polystyrene
pieces, from the oven.
1. Clean the appliance exterior with a soft
moistened cloth.
2. Remove the hanging grid from the oven.
3. Clean the oven and the accessories with a hot
detergent solution.
Observe the operating instructions enclosed with the
hob.
Initial burn-in Before using the appliance for the first time, you
must set the current time on the electronic clock.
Heat the empty oven for approx. 30 minutes.
Select top and bottom heat at a setting of 240 °C.
Cleaning out Clean the oven with a hot detergent solution.
Fit the hanging grid.
Current time After connecting to the mains or after a power
failure, the display 0:00 will flash.
Setting Press the
>
button and set the current time with
the rotary knob (e.g. 15:00).
To correct the time, press the
> button until
the
#
symbol flashes.
Then set the time.
Note: The time cannot be completed if an automatic
function or the timer has been set (to cancel see
”electronic clock”).
To Next Page
Loading...
