42
Inset rack
Removing
You can take the inset rack out for cleaning.
1.
At the front, press the frame upwards and
remove.
2. At the rear, pull the frame towards the front and
remove.
Clean the inset racks with washing up liquid and a
sponge or with a brush.
Hanging
The frame fits on the left and right.
The protrusion (a) must always on the bottom.
1. At the rear, push the frame in as far as it will go.
2. Push the frame backwards.
3. At the front, push the frame in as far as it will go.
4. Push the frame downwards.
To Next Page
Loading...
