13. Appendix
58
Software Manual
2) Click on [Visual Basic Projects] button. After “New Projects” windows is opened, select or enter
from the following items and then click on [OK] button.
- Project types : Visual Basic Projects
- Templates : Smart Device Application
- Name : Enter the voluntary name (in this case, name is SmartDeviceApplication1).
3) Set the device to target, type of application to make out after the Smart Device Application Wizard
is displayed.
- Select the platform to target : Windows CE
- Select the project type to make out. : In this case, select the Windows application.
After finishing selecting, click on [OK] button.
To Next Page
Loading...
