Conviron A1000 - Page 64

To Previous Page



Conviron Head Office

Winnipeg, Canada

conviron.com

Conviron US

Pembina, USA

conviron.com

WWW.CONVIRON.COM

info@conviron.com

Conviron Europe Ltd.

Cambridgeshire, UK

conviron.co.uk

Conviron Germany GmbH

Berlin, Germany

conviron.de

Conviron China

Shanghai, China

conviron.cn

Conviron Australia

Melbourne, Australia

conviron.com.au

Management System Certified to ISO9001

256574-ENG

R01, February 2016

respective owners. Information is subject to change without written notice.

Main Page

Table of Contents6
Precautions11
Hazard Identification Symbols11
Table 1-1 Hazard Identification Symbols11
General12
Installation12
Operation12
Maintenance13
Kit Installation15
Preparation15
Figure 2-1 Empty A1000 Chamber15
Unpacking16
Tissue Culture - TC Kit17
TC Kit Parts List17
TC Kit Installation18
Installing the Back Wall Plenum Bottom Support18
Figure 2-2 TC Back Wall Plenum Bottom Support Installed18
Installing the Back Wall Plenum19
Figure 2-3 TC Back Wall Plenum Installed19
Installing the Air Shelves20
Figure 2-5 TC Bottom Air Shelf Installed20
Installing the Lamp Support Canopies21
Figure 2-6 TC Lamp Canopy Supports Detail21
Installing the Wire Shelf Supports22
Figure 2-8 TC Kit Installed22
Plant Growth23
2.3.1 PG Kit Parts List23
PG Kit Installation24
Installing the Canopy Filter and Fans25
Figure 2-9 PG Fan and Air Inlet Cavities25
Figure 2-10 PC Canopy Air Inlet Filter Installed25
Figure 2-12 PG Canopy Fans Installed26
Connecting the Canopy Fans to the Control System27
Figure 2-13 PG AC/DC Converter Electrical Connections27
Figure 2-14 PG AC/DC Converter Installed27
Installing the Back Wall Plenum Support28
Figure 2-15 PG Back Wall Plenum Bottom Support Installed28
Installing the Back Wall Plenum29
Figure 2-16 PG Back Wall Plenum Installed29
Installing the Lamp Canopy Supports and Lamp Canopy30
Figure 2-17 PG Lamp Canopy Supports30
Figure 2-18 PG Lamp Canopy Installed30
Figure 2-19 PG Lamp Canopy Plug Connection31
Installing the Unifloor32
Figure 2-21 PG Unifloor Installation32
Installing the Wire Shelf33
Figure 2-23 PG Kit Installed33
Incubation - in Kit34
2.4.1 in Kit Parts List34
IN Kit Installation35
Installing the Back Wall Plenum Support35
Figure 2-24 in Back Wall Plenum Bottom Support Installed35
Installing the Back Wall Plenum36
Figure 2-25 in Back Wall Plenum Installed36
Installing the Wire Shelves37
Figure 2-26 in Bottom Shelf Installed37
Figure 2-27 in Wire Shelf Supports Detail37
Installing the Lamp Fixtures38
Figure 2-28 in Lamp Supports Installed Onto the Fixture38
Figure 2-29 in Single Lamp Fixture Per Shelf Installed38
Figure 2-31 in Kit Installed39
Arabidopsis - AR Kit40
2.5.1 AR Kit Parts List40
AR Kit Installation41
Figure 2-32 AR Back Wall Plenum Bottom Support Installed41
Installing the Back Wall Plenum Support42
Figure 2-33 AR Back Wall Plenum Installed42
Installing the Lamp Canopies43
Figure 2-35 AR Lamp Canopy Installed44
Installing the Wire Shelves45
Figure 2-36 AR Bottom Shelf Location and Supports Detail45
Figure 2-37 AR Kit Installed45
Chamber Installation Requirements47
Chamber Placement47
Chamber Clearance47
3.1.2 Power Supply47
Water Supply48
Condensate Drain48
Chamber Installation49
Connecting the Chamber49
Leveling the Chamber50
Installing the Drip Pan50
Figure 4-5 Chamber Levelers50
Figure 4-6 Tighten the Locknut50
Chamber Start-Up and Operation51
Start-Up51
Figure 5-1 Power on51
Operation52
Drip Pan52
Fresh & Exhaust Air Connections52
Additive Humidity52
Figure 5-2 Damper Adjustment Lever52
Fan Speed Control53
Troubleshooting55
Maintenance57
Cleaning57
Water Reservoir57
Replacing Lamps58
Ultrasonic Humidity System58
Technical Specifications59
Terms & Definitions61
Table 8-1 Terms and Definitions61
Consumables62
Disposal62

Conviron A1000 - Page 64

Table of Contents

Related product manuals