How to operate the control panel
User manual 112
Step Action Button
8 Use the tilt selector switch to choose the cleaning level you
require.
Q = quick clean
1 = light soiling
2 = normal soiling
3 = heavy soiling
4 = heavy soiling with Shine+
Q, 1, 2, 3, 4
9 Press the "Write/Edit menu" button to confirm.
Result:
You can now enter the name of the recipe.
10 Use the tilt selector switch to select the letters, and the "Next" and
"Back" buttons to switch between the respective placeholders.
11 Press the "Write/Edit menu" button to confirm the finished recipe
name.
12 Use the tilt selector switch to choose a spare memory location.
Please note:
You can also select and overwrite a memory location that is
already occupied.
13 Press the "Write/Edit menu" button to confirm.
Result:
Automatic cleaning is saved in the cookbook.
Assigning a recipe or cleaning program to a Press&Go button
Follow the steps below to assign a recipe or a cleaning program to a Press
&Go button:
Step Action Button
1
Press the "Cookbook menu" button.
Result:
A list of saved recipes appears in the display.
2 Use the tilt selector switch to choose the recipe or cleaning
program you require.
3 Hold down the required button of the Press&Go keypad for 3
seconds.
Result:
An audible signal is given.
The recipe or cleaning program is assigned to the Press&Go
button.
To Next Page
Loading...
