Convotherm OES - Accessing the Default Settings

How to operate the control panel
User manual 114
► Accessing the default settings
Objective
You wish to modify the default settings to suit your needs.
Accessing the default settings
Follow the steps below to access the selection menu for the default settings:
Step Action Button
1 Press the "Functions menu" button.
Result:
The display shows the function icons.
2
Use the tilt selector switch to choose the "default settings" icon.
3 Press the "Functions menu" button to confirm.
Result:
The Confirm menu appears in the display.
4 Use the tilt selector switch to choose "YES".
YES
5
Press the "Functions menu" button to confirm.
Result:
The display shows the icons for the default settings.
Closing the functions menu
To exit the functions menu, follow the steps below:
Step Action Button
1
Press the "Start/Stop" button.