How to operate the control panel
User manual 115
► Setting the beep signal
Objective
You can use the "Beep signal" default setting to set the audible signal.
Requirements
The display shows the icons for the default settings.
Setting the beep signal
Follow the steps below to set the beep signal:
Step Action Button
1 Use the tilt selector switch to choose the "Beep signal" icon.
2 Press the "Functions menu" button to confirm.
Result:
Various options appear in the display.
3 Use the tilt selector switch to choose the audible signal you
require.
01-12
4 Press the "Functions menu" button to confirm.
Result:
The beep signal is set.
To Next Page
Loading...
