How to operate the control panel
User manual 80
► Selecting Crisp&Tasty (moisture removal)
Objective
You wish to remove excess moisture from an item of food.
Requirements
To do this, the following requirements must be satisfied:
You have selected one of the "superheated steam" or "convection" programs.
You are in the Functions menu.
Selecting Crisp
&Tasty (moisture removal)
Follow the steps below to work with the Crisp
&Tasty function:
Step Action Button
1 Use the tilt selector switch to choose the "Crisp&Tasty" icon.
2 Press the "Functions menu" button to confirm.
Result:
The Confirm menu appears in the display.
3 Use the tilt selector switch to choose "YES".
YES
4 Press the "Functions menu" button to confirm.
Result:
A selection menu appears in the display.
5 Use the tilt selector switch to choose the degree of moisture
removal:
low, moderate or high
6
Press the "Functions menu" button to confirm.
Result:
The Crisp&Tasty extra function is enabled.
The function indicator lights up.
More on this ...
How to do it
Basic procedure for selecting extra functions and special programs.................................................78
To Next Page
Loading...
