Convotherm OES - Setting the Start-Time Preset

How to operate the control panel
User manual 75
► Setting the start-time preset
Objective
You wish to use the start-time preset to specify when the combi steamer will automatically start the
required cooking or regenerating program. This helps you to avoid bottlenecks in production and
preparation, and lets you make the most of low-usage periods.
Time settings for the start-time preset
The illustration below shows the adjustable time settings in the display:
The time settings have the following meanings:
Position Meaning When value is displayed
top Total cooking time:
01:00 hour
only in cooking-time mode
bottom left The combi steamer starts in
48 minutes
in cooking-time and core-temperature mode (optional
on OES and OGS)
bottom center Start time:
10:23 am
in cooking-time and core-temperature mode (optional
on OES and OGS)
bottom right Cooking end time:
11:23 am
only in cooking-time mode
Setting the start-time preset
To enter the start-time preset, follow the steps below:
Step Action Button
1 Press and hold the "cooking time" button while operating the tilt
selector switch.
Result:
The display shows the time settings for the start-time preset.
2 Press and hold the "cooking time" button while using the tilt
selector switch to move the display cursor to the start-time posi-
tion.
3 Release the "cooking time" button.
Result:
The combi steamer automatically switches to start-time preset
mode.
4 Press and hold the "cooking time" button while using the tilt
selector switch to adjust the start time to the value you require.
Result:
The set cooking program starts automatically when the start time
is reached.