How to operate the control panel
User manual 72
► Entering the regenerating program
Entering the regenerating program
To enter your regenerating program, follow the steps below:
Step Action Button
1
Select a regenerating program.
2
Enter the regenerating temperature.
3 Define the switch-off criteria:
Cooking time or
Core temperature
or
4
Press the "Functions menu" button to select an extra function.
5 Select one of the following extra functions if required:
Tray Timer
Reduced power
Lower fan speed
Program protection
Result:
You have now finished entering your regenerating program, which
is held in the temporary memory.
Saving a cooking program
When entering a cooking program, the program is saved in a temporary memory. Whenever a new
program is entered, it overwrites this temporary memory and wipes the original cooking program.
If you wish to use a cooking program again later, you can transfer it to the cookbook as a recipe.
More on this ...
How to do it
Selecting extra functions and special programs ................................................................................77
Next steps
Regenerating as part of the daily routine ...........................................................................................95
To Next Page
Loading...
