How to operate the control panel
User manual 89
► Applying the keypad lock
Objective
You can block the use of almost all the controls on your combi steamer. You can use this lock to pre-
vent unauthorized people from changing settings on your combi steamer.
You need to enter a PIN code to apply the lock.
Limitations
You cannot block use of the following controls:
Control Button
On / Off
Start / Stop
"Next" and "Back"
Tilt selector switch
Press&Go buttons
Preset PIN code and changing the PIN code
The PIN code "PIN 001" is preset in the factory. Please contact an approved customer service engi-
neer if you wish to change the PIN code.
Requirements
To do this, the following requirements must be satisfied:
The combi steamer is not running.
You are in the Functions menu.
Locking
Follow the steps below to lock the buttons on your combi steamer:
Step Action Button
1 Use the tilt selector switch to choose the "Keypad lock" icon.
2 Press the "Functions menu" button to confirm.
Result:
The Confirm menu appears in the display.
3 Use the tilt selector switch to choose "YES".
YES
4 Press the "Functions menu" button to confirm.
Result:
"PIN 000" appears in the display.
To Next Page
Loading...
