How to operate the control panel
User manual 73
► Entering a multi-step cooking or regenerating program
Entering a multi-step cooking or regenerating program
To create a multi-step cooking program, follow the steps below:
Step Action Button
1 Press and hold the required cooking program or regenerating
program for 3 seconds.
Result:
The display shows the following items
top: 01/01 for the first cooking step
bottom: the time and temperature values
2 Enter the cooking step. To do this, follow the instructions for
entering a cooking program.
Result:
Once you have entered the extra functions, you have finished
entering step 1 of your cooking program.
3 Press and hold the required cooking program or regenerating
program for 3 seconds.
Result:
The display shows the following items
top: 02/02 for the second cooking step
bottom: the time and temperature values
4 Enter the cooking step.
In this cooking step you can select the Cook&Hold program if you
wish.
Result:
Once you have entered the extra functions, you have finished
entering step 2 of your cooking program.
5 Enter further cooking steps by repeating steps 3 and 4. You can
enter up to 20 cooking steps.
Result:
You have now finished entering your multi-step cooking program,
which is held in the temporary memory.
Saving a cooking program
When entering a cooking program, the program is saved in a temporary memory. Whenever a new
program is entered, it overwrites this temporary memory and wipes the original cooking program.
If you wish to use a cooking program again later, you can transfer it to the cookbook as a recipe.
To Next Page
Loading...
