How to operate the control panel
User manual 63
► Cooking with Press&Go (optional)
Hot steam / vapor
Risk of scalding from hot steam and vapor
Escaping hot steam and vapor can cause scalding to face, hands, feet and legs.
f Open the appliance door as specified in the user manual. Never put your head into the oven!
f For floor-standing appliances, insert the preheat bridge if there is no loading trolley in the combi
steamer during preheating.
Objective
You wish to start a recipe directly.
Requirements
Check that the following requirements have been met:
The combi steamer is cleaned properly.
The suction panel is properly locked in place.
For table-top appliances: the rack or shelf rack is fixed in place.
For floor-standing appliances: the preheat bridge is fitted.
You are already conversant with the operating steps listed under "How to do it correctly".
Cooking
To cook, follow the steps below:
Step Action Button
1
Preheat your combi steamer.
2
Remove the preheat bridge from floor-standing appliances.
3 Place the food inside the oven as soon as preheating has fin-
ished.
4
Select the recipe (Press
&Go) you want, such as Rolls.
5
Close the appliance door.
Result:
Your recipe starts running.
An audible signal is given as soon as the recipe is finished.
6
Open the appliance door and remove the finished product.
Canceling programs before they have finished
To cancel programs before they have finished, follow the steps below:
Step Action Button
1
Press the "Start/Stop" button.
To Next Page
Loading...
