How to do it correctly
User manual 167
► Inserting and removing the preheat bridge (floor-standing appli-
ances only)
Hot surfaces
Risk of burns from high temperatures inside the oven and on the inside of the appliance door
You may get burnt if you touch any of the interior parts of the oven, the inside of the appliance door or
any parts that were inside the oven during cooking.
f Wear personal protection equipment as specified in safety regulations.
Purpose of the preheat bridge
The preheat bridge is required in floor-standing appliances for the following procedures:
When preheating without loading trolley, because escaping hot steam may otherwise scald feet and
legs.
During automatic cleaning without the loading trolley, because otherwise cleaning agent or steam
may escape.
Insert preheat bridge
To insert the preheat bridge, follow the steps below:
Step Action Illustration
1
Attach the preheat bridge (1).
2
Swing the preheat bridge up (2).
To Next Page
Loading...
