Your combi steamer cooking programs
User manual 132
Recommended values for regenerating
Follow these rules for regenerating:
Always preheat the combi steamer.
After each regenerate cycle, always reheat to the preheat temperature. You can start the regenerat-
ing program again as soon as the preheat temperature is reached.
The following recommended values are for a full load:
OEB, OGB
OES, OGS
Plate capacity
up to ø 32 cm
Plate gap 66 mm
Plate capacity
up to ø 32 cm
Plate gap 80 mm
Preheat tem-
perature with
superheated
steam
Preheat
time
Regenerating
temperature
Regenera-
ting
time
6.10 20 - 180 °C 2 min 125 - 135 °C 4 - 8 min
6.20 39 - 180 °C 2 min 125 - 135 °C 4 - 8 min
10.10 32 - 180 °C 2 min 125 - 135 °C 4 - 8 min
10.20 60 - 250 °C 3 min 135 - 140 °C 6 - 10 min
12.20 74 59 250 °C 3 min 135 - 140 °C 6 - 10 min
20.10 61 50 250 °C 3 min 135 - 140 °C 6 - 10 min
20.20 122 98 250 °C 3 min 135 - 140 °C 6 - 10 min
To Next Page
Loading...
