How to do it correctly
User manual 177
Loading floor-standing appliances using the loading trolley
To load the oven using the loading trolley, follow the steps below:
Step Action Illustration
1 Place food on loading trolley.
WARNING
Please note that containers holding liquids or food that will
liquefy during cooking must be placed on shelf levels that allow
a proper view inside the container.
2
Open the appliance door.
3
Remove the preheat bridge.
4
Push the loading trolley in as far as it will go (1).
Caution:
Risk of hands being pinched.
Use the handle.
5
Remove the handle and hang it on the left-hand side wall.
6
Close the appliance door.
7
Lock the wheels of the loading trolley (2).
Removing food
To remove the food, follow the steps below:
Step Action Illustration
1
Open the appliance door.
2
Release the wheel lock.
3
Attach the handle and pull the trolley out.
4
Close the appliance door.
More on this ...
How to do it correctly
Opening the appliance door safely ..................................................................................................165
Inserting and removing the preheat bridge (floor-standing appliances only)...................................167
To Next Page
Loading...
