Instruction Manual | 1
1.0 Introduction
This Instruction Manual has no contractual value and under no circumstances may Corning be held liable on the basis of the
information contained in this Instruction Manual.
This Instruction Manual details all the knowledge required to implement, use and maintain the system, and the collection of the
information displayed.
Thus, after carefully reading it, the operator will be able to:
Connect the auxiliary devices (power cable, USB devices, sensors) and power on the device
Navigate the device interface
Perform basic maintenance
Corning publishes this Instruction Manual “as is”, without any warranty of any kind, explicit or implied, including, but not limited
to, the implied warranties of the terms of sale and/or fitness for a particular use, for the purpose of providing simple and accurate
information. Corning cannot therefore assume any liability for any misinterpretation. While every effort has been made to provide a
Instruction Manual that is as accurate as possible, it may contain technical inaccuracies and/or typographical errors.
Corning cannot be held liable for any loss of profit, loss of business, loss of data, business interruption, or for indirect, specific,
accidental, or consequential damages of any kind. In the event of damage occurring as a result of a defect (imperfection) or error
contained in this Instruction Manual, Corning agrees to send the user a paper or electronic document containing the corrections
applied as soon as possible.
This Instruction Manual is updated regularly. The most recent version of this Instruction Manual is available on request from Corning.
However, should significant changes be made to the Instruction Manual, Corning undertakes to send the user the new Instruction
Manual in paper or electronic format as soon as possible. Please note that this does not imply an update to the hardware and/or
software in your possession.
The owner of the product is obliged to keep this Instruction Manual for the duration of use of the product.
This Instruction Manual contains a chapter featuring quick solutions to the most frequently encountered problems.
Any request for information or modification relating to this Instruction Manual must be sent to Videodrop@corning.com.
1.1 Symbols and conventions
This symbol means WARNING. Instructions preceded by this symbol may cause personal injury or damage the device and
facilities if not properly followed or implemented.
This symbol means INFORMATION. Additional information not affecting the use of the device.
1.2 Ownership and copyright
All Instruction Manuals and documentation of any kind are the property of Corning and are protected by copyright, all rights reserved.
Your right to copy this documentation is limited to legal copy rights. These Instruction Manuals may not be distributed, translated
or reproduced, in whole or in part, in any manner or form whatsoever, without the prior written consent of Corning. Therefore,
reproduction, adaptation or translation of this Instruction Manual without prior written permission is prohibited within the limits of
copyright laws.
1.3 Service life
The lifetime of the device, during which Corning commits to the availability of spare parts, is 5 years from delivery date.
1.4 Maintenance
Corning recommends performing an annual preventive maintenance performed by Corning authorized staff.
1.5 Reverse engineering
The device may not be distributed, reproduced, disassembled, analyzed, adapted, modified, incorporated into or combined with any
other device, except as permitted by law.
Software may not be distributed, reproduced, translated, disassembled, decompiled, analyzed, adapted, modified, incorporated or
combined with any other software, except as permitted by law.
The device and its software may not under any circumstances be transferred in any way to any third party.
Resale of the device and/or its software is prohibited.
To Next Page
Loading...
