2 Web Operation
⚫ The interfaces in the Manual are used for introducing the operations and only for reference.
⚫ The actual interface might be different dependent on the model you purchased. If there is inconsistency
between the Manual and the actual product, the actual product shall govern.
⚫ The Manual is a general document for introducing the product, so there might be some functions described for
the Device in the Manual not apply to the model you purchased.
⚫ Besides Web, you can use our KVMS Pro to login the device. For detailed information, refer to KVMS Pro
user’s manual.
2.1 Network Connection
⚫ The factory default IP of the Device is 192.168.1.245 .
⚫ The Device supports monitoring on different browsers such as Safari, Firefox, Google to perform the functions
such as multi-channel monitoring, PTZ control, and device parameters configurations.
⚫ Step 1 Check to make sure the Device has connected to the network.
⚫ Step 2 Configure the IP address, subnet mask and gateway for the PC and the Device. For details about
network configuration of the Device, refer to "1.12 Network ".
⚫ Step 3 On your PC, check the network connection of the Device by using "ping ***. ***.***.***".
⚫ Usually the return value of TTL is 255.
2.2 Web Login
⚫ Step 1 Open the browser, enter the IP address of the Device, and then press Enter.
⚫ The Login in dialog box is displayed. See Figure 2-1.
⚫ Figure 2-1
To Next Page
Loading...
