CP Plus Orange - Setting Period

1.12 Setting Period
⚫ The system only activates the alarm in the defined period. Step 1 Next to Period, click Setting.
⚫ The Setting interface is displayed. See Figure 1-169.
⚫ Figure 1-169
⚫ Step 2 Define the motion detection period. By default, it is active all the time.
⚫ Define the period by drawing.
⚫ Define for a specified day of a week: On the timeline, click the half-hour blocks to select the active
period.
⚫ Define for several days of a week: Click before each day, the icon
⚫ switches to . On the timeline of any selected day, click the half-hour blocks to select the active periods,
all the days with will take the same settings.
⚫ Define for all days of a week: Click All, all switches to . On the
⚫ timeline of any day clicks the half-hour blocks to select the active periods, all the days will take the same
settings.
⚫ Define the period by editing. Take Sunday as an example.
1) Click .