⚫ This function is for some series product only.
⚫ During playback process, it can analyze the motion detect zone in the scene and give the analysis
result.
This function is for channel that already enabled motion detect function (Main Menu > ALARM >
VIDEO DETECT > Motion Detect).
⚫ Step 1 Select a channel to playback video and then click . You can view the grids on the playback
video.
⚫ This function is for one-channel playback mode.
⚫ If you are in multiple-channel playback mode, double-click a channel first to switch to one-channel playback
mode.
⚫ Step 2 Left click mouse and then drag to select smart search zones (22*18（PAL）, 22*15
⚫ （NTSC）).
⚫
⚫
⚫ Step 3 Click to go to smart search and playback. System is going to playback all motion detects record
footages.
⚫ Step 4 Click again to stop smart search function.
⚫ The motion detect region cannot be the full screen zone.
⚫ The motion detect region adopts the current whole play pane by default.
⚫ Selects the other file on the list, system begins playing the motion detect footages of another file.
⚫ The time bar unit switch, backward play, frame by frame are null when system is playing motion detect
file.
1.6.4 Mark Playback
⚫ When you are playback record, you can mark the record when there is important information. After
playback, you can use time or the mark key words to search corresponding record and then play. It is
very easy for you to get the important video information.
⚫ Add Mark
⚫ When system is playback, click Mark button , you can go to the following interface. See Figure 1-
98.
To Next Page
Loading...
