CPS SCA Series - Page 43

35
Step 9 Optional - Install an anti-theft padlock when the installation is
complete. The anti-theft padlock is used to prevent the inverter
from being stolen when the equipment is installed outdoors. The
inverter may be locked to the bracket (
Step 10 Figure 3-16).
Figure 3-16 Location of the Anti-Theft Padlock
The anti-theft padlock should meet the dimensional requirements
shown in Figure 3-17.
B
C
A
Figure 3-17 Dimensions of Anti-Theft Padlock Shackle
Recommended lock size:
A: Shackle diameter 3~6mm
B: Shackle width 20~50mm
C: Shackle height 20~50mm