97
6.2.5 Power Derating Setup
“Power Derating Setup” menu is used to set the active power derating
parameters including Active Power Derating, Over frequency derating,
Low frequency derating, High temperature frequency derating, etc. The
parameters are shown in Figure 6-13.
Active Power Derating
Percentage
CtrMode
P3/3
100.0%
0
OvrFrqMax(Hz)
OvrFrqMin(Hz)
P2/3
OvrFrqSlop(P/s)
60.00
0.16%
61.50
60.40
OvrFrqRecoveryT(S)
RecovryFrq(Hz)
60
OvrFrqDeratingMode
0
Power vs Grid Frequency
LVRT
/HVRT Setup
Setting
P1/2
System Parameters
Protection Parameters
Power Derating Setup
Reactive Power Derating Setup
ARC Parameters
Control Command
Power vs Grid Voltage
OvrVolSlop
OvrVoltTrip
P1/3
OvrVolFilterT(s)
60
0.0%
110.00%
Disable
Figure 6-13 Power Derating Setup
To Next Page
Loading...
