109
6.3.2 Automatic Turn ON/OFF
The inverter will start up automatically when the output voltage and power
of PV arrays meet the set value, AC power grid is normal, and the ambient
temperature is within allowable operating range.
The inverter will be shut down automatically when the output voltage and
power of PV modules are lower than the set value, the AC power grid fails,
or the ambient temperature exceeds the normal range.
6.4 History Record
Move the cursor to History Record in the main menu interface. Press ENT to
check the history information. There are 3 submenus in the History Record
menu: Current Error, Running Record and Fault Record. See Figure 6-19.
To Next Page
Loading...
