111
Device Information and press ENT to check the device information, as
shown in Figure 6-20.
Inverter information
P1/2
Device Model: SCA60KTL-DO/US-480
Device SN: 0 0000 0000 0000
DSP Ver: 01.00 0x505A
LCD Ver: 01.00
DSP Bootloader Ver: 01.00
LCD Bootloader Ver: 01.00
MiniMCU Ver: 01.00
Data Logger Information
P2/2
IP 0.0.0.0
Data Logger SN 0 0000 0000 0000
Subnet Mask 0.0.0.0
DNS Server 0.0.0.0
Gateway 0.0.0.0
Address Range
Main Menu
Measurement Data
History Record
Power On/Off
Device Information
Setting
Figure 6-20 Device Information
This menu provides the information to identify the version of boards in the
inverter, model number, serial number and data logger information. This
information may be required when contacting CPS service.
6.6 Start-Up
Automatic start-up: The inverter will start up automatically when the output
voltage and power of PV arrays meet the set value, AC power grid is normal,
and the ambient temperature is within allowable operating range.
WARNING:
Please follow the guidelines below before on-grid operation to
eliminate possible dangers and to ensure safety.
To Next Page
Loading...
