10
2.2 Product Features
High Conversion Efficiency: Advanced 3-level conversion topology with
Space-Vector PWM; Max. efficiency: 98.8%, CEC efficiency: 98.5%.
Grid Adaptability: IEEE 1547 Interconnect Standard and CPUC Rule 21
applicable; Reactive Power; >0.99 PF (±0.8 adjustable), Selectable
Apparent Power rating enables Full Active Power rating to +/-0.91 PF, and
optional local or remote Active Power Curtailment.
Flexible Communication: Supports standard CPS Modbus RS485,
SunSpec Modbus, and HTTPS/XML communications via FlexOM gateway
card to ensure compatibility with 3rd party monitoring and control systems.
The FlexOM gateway card enables further command/control as well as
remote firmware upgrades. (FlexOM gateway card is optional accessory.
Refer to FlexOM gateway card manual for further detailed information.)
Wide DC input voltage range: Operating DC Input Voltage Range: 200-
950VDC; Max DC input voltage: 1000VDC.
Long Service Life: Uses thin-film and electrolytic capacitors to extend
inverter's service life.
3 MPPTs: Multi-channel MPPT (Maximum Power Point Tracker) enables
maximum design flexibility and energy harvest optimization over the life of
the system.
Separable Wirebox: The wirebox enables fused input of either discrete
wiring using the Standard wirebox, or the choice of two optional Rapid
Shutdown (RSD) wireboxes with integrated Sunspec PLC transmitters for
use with either Tigo TS4-F integrated smart modules and Tigo TS4-A-F
products, or APsmart RSD-S-PLC rapid shutdown MLPE’s.
High Protection Degree: Powder coated aluminum NEMA 4X enclosure
meets the demanding needs of both indoor and outdoor use.
To Next Page
Loading...
